| Starting the boiler: Feed wood pellet fuel into the combustion chamber using the auger feed button (approx 5-6 handfuls). If you are using corn, add a few handfuls of wood pellets to the corn for easier igniting of the corn. Ignite the fuel using a fuel starter such as woodchips impregnated with wax. |
 |
|
| When the fuel is well ignited (about 5 Minutes). You are now ready to turn on the boiler. |
 |
|
| Operation: Now let the Multi-Heat’s controls do the rest. The boiler will operate between Hi, Lo, and Standby Mode to maintain the boiler’s set-point. |
 |
|
| Maintenance: The only required maintenance is filling the easy access large hopper in the rear of the boiler and... |
 |
|
| Ash and clinker (corn) removal when needed. |
 |
|
